manualshive.com logo in svg

Moduline GCE060D, Оригинальное руководство пользователя

Поделиться
Скачать
Moduline GCE060D Скачать руководство пользователя страница 40

USA Ed. 1116

18.5 • MANUAL RINSE

18.6 • OVENCLEAN DETERGENT

by means of the hand shower (optional), you can 

perform a manual rinsing.

For the soft and hard washings, it is mandatory 
the use of OVENCLEAN tablets, made properly for 
degreasing and cleaning self-cleaning ovens.

The Ovenclean tablets dissolve and easily remove all 

types of organic fouling, also burned.

HOW TO USE:

Insert the tablet/s in the cooking cavity above the 

exhaust filter before starting a washing program, as 

explained in the relevant chapters.

IMPORTANT - SAFETY TIPS

•  It causes severe burns. 

•  Irritating to respiratory system. 

•  Keep locked up and out of reach of children. 

•  Keep container tightly closed in a cool place.

•  Keep away from reducing agents, oxidizing 

agents, acids, alkalis, metals, heavy-metal com-

pounds, combustible materials. 

•  In case of contact with eyes, rinse immediately 

with water and seek medical advice. 

•  Use protective clothing, gloves and eye protec-

tion, face protection. 

•  In case of accident or unwellness, seek medical 

advice immediately (show the label and MSDS 

provided). 

•  Do not swallow. Hazardous ingredients: sodium 

metasilicate, sodium hydroxide NIF b-61.077.962

 40

UN 3262

Содержание GCE060D






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды