manualshive.com logo in svg

Moduline GCE060D, Оригинальное руководство пользователя

Поделиться
Скачать
Moduline GCE060D Скачать руководство пользователя страница 31

USA Ed. 1116

15 • CLEARING PROGRAMS

Press the P button for about 5 seconds.

It’s displayed the screen that allows the management 

of programs.

Turn the knob until the CAn (delete) item is displayed 

and press ENTER to select it.

Enter the program number to be deleted by turning 

the knob and press ENTER.

The equipment requires further confirmation, press 

ENTER again.

NOTE - The cancellation of a program can only take 

place with the device in STOP mode.

16 • STARTING PRELOADED PROGRAMS

To access the preloaded cooking programs, press the 

P button.

The field showing the program displays the P01 item 

flashing.

Turn the knob to the right to view the saved cooking 

programs.

Press ENTER to select the desired program and 

START / STOP to start the program.

NOTE - To change the values of a preloaded program, 

select it using ENTER and proceed as shown in the 

previous chapter.

NOTE - To save changes to an existing program, 

proceed as described in “Saving programs”; the 

equipment will propose to overwrite the changes to 

the program stored.

NOTE - Turning the knob to the left allows you selec-

ting the manual mode or a washing program (if any).

Preloaded programs

 31

Содержание GCE060D






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды