manualshive.com logo in svg

Moduline GCE060D, Оригинальное руководство пользователя

Поделиться
Скачать
Moduline GCE060D Скачать руководство пользователя страница 10

USA Ed. 1116

•  Do not store explosives in the appliance, such as aerosol cans with flammable propellant.

•  boiling hazard: to avoid reaching boiling point, do not use containers filled with liquids that liquefy with 

heat that exceeds that which can be easily kept under control.

•  The sound pressure level emitted by the product is less than 70db.

WARNING!
In the event of malfunctioning:

•  switch off the appliance immediately

•  cut out and/or turn off all mains supplies (water and electricity)

•  only call the service centre or an authorised dealer and ask for original spare parts

3 • GENERAL RECOMMENDATIONS FOR THE USER

USE

4 • CLEANING AND MAINTENANCE

•  Disconnect the appliance from the mains power supply before carrying out any cleaning operations.

•  before using your new appliance clean out the cavity carefully. Do not use acids or corrosive cleaners, 

wire wool or brushes to clean either the appliance cavity or the external sides (use warm water with a 

suitable detergent).

•  Do not wash the appliance with jets of water under pressure.

Proper daily cleaning is the best way to obtain perfect cooling / freezing and trouble-free operation. 

In fact: 

•  The flavour and smell of the food are unaltered

•  The appliance works smoothly

•  Consumption of energy will be lower

•  Costly, inconvenient maintenance operations are avoided

 10

Содержание GCE060D






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды