61
Creating Shapes and Entering Text
To create a shape, click one of the shape-drawing buttons and
drag.
To enter text, click the text-entry button, then click the loca-
tion where you want to insert text. While in this state, type in
the text with the keyboard.
To change the size of a shape or text, refer to "Dr. Engrave -
Changing the Size and Location of Shapes and Text."
1
Click the shape or text string you want for adding
thickness to select it.
Click the
.
The [Relief Size] dialog box appears.
The dialog box may differ depending on the type of object you selected. The following screen shows the dialog box that
appears when creating a relief of shapes or text.
Make the settings for the required items for creating the relief, then click [OK].
Create a Raised Engraving (Relief)
Add thickness to shapes and text to create a relief.
These choose the configuration for pushing the
object up (or down).
These choose how to stack the relief.
These choose whether to push down or stack using
the value entered for the relief height.
This is for entering the angle of the base side when
has been selected.
When this is selected, the relief of the
chosen object is smoothed.
This is for entering the direction of the relief ridge.
You can enter a value when a button other that
has been selected.
Enter the height of the bottom of the relief.
Enter the thickness of the relief.
2