MODELA MDX-15 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 72

MODELA MDX-15 Скачать руководство пользователя страница 11

9

UP

DOW

N

TOOL

4 Setting Up and Connection

Do not use with any power supply
other than the dedicated AC adapter.

Use with any other power supply may lead
to fire or electrocution.

Do not use with any electrical power
supply that does not meet the
ratings displayed on the AC adapter.

Use with any other power supply may lead
to fire or electrocution.

Install on a stable surface.

Failure to do so
may result in falling
of the unit, leading
to injury.

Use within a temperature range of 5 to 40°C (41 to 104°F) and within a humidity range of 35 to 80%.

Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.

NOTICE

Never install this unit in any of the following situations, as it could result in damage:

Places where the installation surface is unstable or not level.
Places with excessive electrical noise.
Places with excessive humidity or dust.
Places with poor ventilation, because the MODELA generates considerable heat during operation.
Places with excessive vibration.

* Do not place any object

within the area

30 cm (12 in.)

AC adapter jack

Connecting the AC Adapter and Power Cord

Connect in the order of the numbers shown in the figure.

AC adapter

Power cord

2

3

Use only with the power cord
included with this product.

Use with other than the included power cord
may lead to fire or electrocution.

Ground the unit with the ground wire.

Failure to do so may result in risk of electro-
cution in the event of a mechanical problem.

30 cm (12 in.)

10 cm (4 in.)

10 cm (4 in.)

1

«
...
9
10
11
12
13
...
»

Содержание MDX-15









































































Отзывы:

Нет отзывов