manualshive.com logo in svg

MODELA MDX-15, Руководство пользователя, Страница: 59 / 72

Поделиться
Скачать
MODELA MDX-15 Скачать руководство пользователя страница 59

57

Dr. Engrave

This is used to design plates and send the engraving data to MODELA.
You can make large numbers of plates with the same design (such as nameplates and rating plates) with high efficiency.

Set the Engraving Area

The following explanation is for Windows 95/98/Me. If you're using Windows NT4.0/2000/XP, then refer to the explanation in "9.
Software Guide - Driver for Windows NT 4.0/2000/XP - Enter the Cutting Area."

1

From the [File] menu, click [Print Setup...].
The [Print Setup] dialog box appears.

2

Make sure [Roland MODELA MDX-20] is
specified as the printer, then click [Properties].
The [Roland MODELA MDX-20] dialog box
appears.

3

Enter the size of the plate, then click [OK].
Next, click [OK] to close the [Printer Setup] dialog
box.

4

The white portion of the screen is the engraving
area. Lay out shapes and text inside the area.

Type in the Text

Click  

 , then click at the location where you want to type in text.

While in this state, type in the text with the keyboard.

Содержание MDX-15









































































Отзывы:

Нет отзывов