47
Driver for Windows NT4.0/2000/XP
This section explains how to make the settings for the engraving parameters.
When sending data from Dr. Engrave or a commercially available drawing program, the driver sets engraving parameters such as the
tool’s operating speed, depth, and pitch. When sending data from MODELA Player or 3D Engrave to MODELA, the data is sent to the
driver’s output port. At this time, all driver settings other than the port are ignored, and do not affect cutting.
To make the settings for the Windows NT4.0/2000/XP driver, log on to Windows as "Administrators" or "Power Users" account.
Display the Driver Setting Screen
To make the settings for the driver, open Properties. You can use either of the two methods described below to open Properties.
Method 1
When you use this method to make the settings, any changes you make in Properties also affect other Windows-based programs.
1
2
Windows NT4.0:
Right-click the [Roland MODELA MDX-20] icon,
then click [Document Defaults].
Windows 2000/XP:
Right-click the [Roland MODELA MDX-20] icon,
and click [Printing Preferences]. Then, click [Ad-
vanced].
Open the [Printers] folder.
Windows NT4.0/2000:
Click [Start]-[Settings]-[Printers].
Windows XP:
Click [Start]-[Control Panel]. Click [Printers and
Other Hardware], then click [Printers and Faxes].
Method 2
1
From the [File] menu, click [Print Setup...].
The [Print Setup] dialog box appears.
2
Set the printer to [Roland MODELA MDX-20],
and click [Properties].
If you're using Windows 2000/XP, then click
[Advanced].