Model Train Technology LSC IIa, Руководство пользователя

Страница: 19 / 28

18
MODEL TRAIN TECHNOLOGY ™
• TV Simulation works with a White and Blue LED on separate Ports or
in Color with a 3 separate Ports connected to an RGB (Red-Green-
Blue) LED. The LED type is common Anode. (You can buy the proper
RGB LED chip from our store.) The different settings are meant to
simulate different types of TV activity. It’s not perfect but it is
effective, nonetheless. You can mix the FX on each color line if you
want. This effect is a Random-on-Random effect so it may be very
difficult to track the differences.
• Relay – The LSC II will drive the digital inputs of both 5VDC and
12VDC Relays which use a 5V digital signal. When you select 99 for
relay, the LSC II will automatically set the power setting to 27%
assume a 18vdc input. Adjust accordingly for different input voltages
to get 5vdc output.
USING SWITCHES AND FUNCTION KEYS TO
SIMULTATE TRIGGERS
The LSC IIa will let you set triggers so that a port only displays when its
trigger is tripped or “active”. You can assign any valid switch address
within the 16 addresses starting with the first address set for the LSC-IIa.
By default, your LSC-IIa is set the address 3. That means that all the
switch addresses from 3 to 18 are available to assign to ANY of the LSC-
IIa ports. By doing so you can have one or more ports by triggers
simultaneously and you can have multiple LSC-IIa on the layout react in
parallel.
When trigger #1 is tripped, the trigger will stay activated as long as the
switch is Thrown (ON). After the switch is Closed (OFF) the port lights
will continue to Animate for 5 seconds and then turn off. The trigger
Timeout STARTS after the detector is OFF.
If you LSC-IIa is configured a Multifunction decoder, function keys F11-
F26 will operate in the same manner. When the function key is set on,