QS-1311-P01_Qolsys IQ PINpad.doc
Page
1
of
3
17-Sep-13
www.ResolutionProducts.com
QS-1311-P01 IQ PINpad™
Features
•
Secure, 4-digit Code to disarm
•
1-button arming
•
Red/Green LED arming feedback
•
Small, yet comfortable keypad
•
Mounts on wall via VHB® tape, or screws
•
Secure for carrying in purse or mounting on car visor
•
Strong, reliable RF signal.
•
4-6 year battery life on CR2032 battery.
Key Instructions
•
Enroll as a Key Fob.
•
Code programming
Default access code is “1234”.
To change access code: Do these steps
within
4 seconds
1.
Enter current 4-digit access code.
2.
Press and hold the “1” and “3” keys simultaneously. (after 3
seconds, Red LED will be lit)
3.
Enter new 4-digit access code.
(the Green LED will be lit)
Note new access code . BAD GUY CANNOT RESET CODE.
So it must be recorded and remembered!
•
Enrolling:
1.
Refer to the Qolsys control unit installation manual.
2.
Put the control panel in RF Learning mode.
•
Press both the Stay & Away buttons simultaneously for 3
seconds.
Operation
PINpad
Button
Panel Action
LED
Stay
ARM STAY
flashes double red
Away
ARM AWAY
flashes double red twice
PIN Code
DISARM
flashes double green
Stay + Away
PANIC ALARM
flashes red 8 times
POWERED BY
QS-1311-P01_Qolsys IQ PINpad.doc
Page
2
of
3
17-Sep-13
www.ResolutionProducts.com
Pictures
Battery Replacement
CR2032 Battery
+ Terminal up
Insert Screwdriver
here
to open
Red/Green
Status LED
Shows command sent
Stay + Away
=
Panic (Enroll)
TO CHANGE PIN CODE:
Current 4-digit access code, and then…
1 + 3 simultaneously Red LED,
and then…
Enter New Code
