Model Train Technology LSC IIa, Руководство пользователя

Страница: 20 / 28

19
MODEL TRAIN TECHNOLOGY ™
the trigger is tripped. A port set to respond to triggers will stay on
(animating) as long as the function key is set to on.
You can change the duration of the Trigger Timeout as described
below.
Trigger Timeout Settings
Trigger Timeout is the amount of time that Animation continues AFTER
a detector has stopped detecting – by whatever means you have set up.
When you activate a trigger, the trigger stays on for five seconds by
default. Then the trigger shuts. The trigger will stay on until the switch
or function key is turn off, and then for five seconds more. You can
shorten or lengthen the amount of time that the trigger stays active after
the sensor has stopped. The shortest time is immediately, the longest
time is 255 seconds ( 4 ½ minutes).
To change the Trigger Timeout, set the CV values 224-231 to
correspond to the port you want it to activate.
RESET
There are a few reasons that you may want to reset the LSC II back the
factory defaults. One is that you forgot the DCC Address. Or, you just
want to get back to the default settings.
TO RESET THE LSC II, turn on keypad mode. It doesn’t matter what the
display is showing, just that the display is on.
Then, PRESS AND HOLD the two black UP ARROW buttons. After
about 5 seconds, the display will read all ZERO. Release the buttons.
Once the reset is complete the display will blink as few times and then
return the display showing PORT #1 set to “1”.