Model Train Technology LSC IIa, Руководство пользователя

Страница: 6 / 28

5
MODEL TRAIN TECHNOLOGY ™
INTRODUCTION
The LED Scene Controller II (LSC II) is a powerful but simple-to-
use LED animation controller. 100
Quick Set
behaviors have
been preprogrammed so it’s simply a matter of selecting an
output port and then assigning a number representing that
behavior. There are 16 ports and depending on what type of
LED you are using and at what brightness setting you can
connect as many as 64 LEDs. Use our 1-to-4 connector to
connect up to four LEDs per port.
The LSC II has a 1Amp capacity.
Each pin can operate separately, or multiple pins can be
“coordinated” to create other effects. For example, the alternate
flashing mode allows any two adjacent pins to, you guessed it,
alternate flash. If you set all 16 pins to this mode, you have a
marquee lighting effect. This one controller can run the police
lights, a crossing gate, multiple random on off ports, a rotating
beacon, fade streetlights on and off and show a TV simulation in
a building – all at the same time!
Additionally, if you have a DCC Command System for running
your trains, you can connect the LSC II and control (turn on and
off and configure) any combination of those effects from your
hand controller.
A common challenge with using LEDs is deciding what voltage
and resistor value to use so as not to burn them out. To solve
this the LSC II allows you to control the effective output voltage