9
MODEL TRAIN TECHNOLOGY ™
OPERATIONS
To turn on the LSC II, slide the right-hand slide POWER ON/OFF switch to
the RIGHT.
The blue LED on the top of the case will turn on.
The 4-number LEDs may flash or have on odd segment lit but after 2
seconds you will see “
1111
”, then “
3
” and lastly “
1234
” on the display
and then the numbers will disappear.
“
1111
” indicates that the LSC II is set for DCC Multifunction decoder
operation. “
3
” is the default DCC address and “
1234
” indicates that all is
working. At that point the LEDs that you plugged in will all turn on
depending on what FX setting you set. The default mode for each port is
ON and the brightness setting is 20%
If your unit indicates “
2222
” first, then your LSC II is set to operate as a
DCC Accessory switch operation.
Содержание LSC IIa
Страница 2: ...1 MODEL TRAIN TECHNOLOGY ...
Страница 16: ...15 MODEL TRAIN TECHNOLOGY ...
Страница 26: ...25 MODEL TRAIN TECHNOLOGY ...
Страница 27: ...26 MODEL TRAIN TECHNOLOGY ...