Model Train Technology LSC IIa, Руководство пользователя

Страница: 12 / 28

11
MODEL TRAIN TECHNOLOGY ™
You can change the setting as many times as you want.
Remember to press Save.
To see the behavior, switch back to Animation mode.
ADJUSTING THE LED BRIGHTNESS:
To adjust the brightness of any Port, switch the LSC II into
Configuration mode. Press the Right-side button on the top
once. You will see decimal points on each displayed digit of the
LSC II. The number on the right now indicates the brightness
level 0-99% of the port that is selected on the left. Push the
black Up and Down buttons on the right side of the LSC II to
adjust the brightness up or down.
3.3V and 12V settings
The LSC II is configured so that a 100% brightness setting is ~14VDC. This
is a few volts higher than 12V which is maximum for the Woodland Scenic
Roomette® products as well as other 12V LEDs. The default brightness of
all the ports is set at 10%. This is the MAXIMUM value for 3.3V LEDs with
a 25V power source. In this way if you plug in only 3.3V LEDs when you
start up you won’t have any problems. And then you can adjust them as
you need.
It is possible to burn out 3.3V LEDs very quickly by applying
excess voltage above the 50% setting. We opted to give you
this flexibility so that you can mix and match 3V and 12V LEDs on
the same LSC II. Please use this wisely.
Here are the approximate voltages for different power sources:
Power Adapter Output Maximum Port voltage output
25vdc (Woodland Scenic) 14.0v
18v 13.9v
12v (for 3.3V LED only) 8.6v