Model Shipways Western Mountain Buckboard Wagon, Инструкция по эксплуатации

Страница: 4 / 36

Tools: Below is a picture of a suggested tool assortment to build this kit.
Building Tips and Suggestions before Starting to Build
Read assembly instructions to understand and familiarize yourself with various parts and 1.
components and how they relate to each other. For the sake of clarity of detail the cast
parts in these assembly instructions are not painted Satin Black as they should be in the
final model.
Verify that you have all the tools and materials needed to start the build. See the additional 2.
materials and suggested tool list provided.
Follow the suggested build sequence outlined in the assembly instructions.
3.
Pay attention to steps that are BOLD face type. These are critical actions to avoid problems 4.
with assembly or extra care is needed.
Clean excess residue from laser cutting from surfaces and edges of wood parts.
5.
Cast white metal parts are delicate due to replicating in 1/12 th scale. Extra care and cau- 6.
tion is required when cleaning, filing parting lines and adjusting to dry fits.
Cast rail parts can be straightened by gently rolling with your finger on a straight section of
7.
rail on flat corner surface, be careful with the rail posts to avoid bending by accident.
Prime and paint all cast parts Satin Black prior to assembling. Wheel hubs to be painted 8.
DarkTan to simulate wood and then stained as the spokes are stained.
All wood parts to be stained English Oak water based stain and sprayed with Clear Matte
9.
Finish except where noted when stain is used for carving reference. All glues will work with
a water based stain when dry. DO NOT USE solvent based stain which will cause glue joint
failure long term.
Take your time and enjoy the build process as much as the finished model. 10.