Model Shipways Western Mountain Buckboard Wagon, Инструкция по эксплуатации

Страница: 14 / 36

Photo 11
Insert round head bolts from the top surface of the platform and glue (2) -1/4” (rear) and (2) 2.
- 3/8” (front) long bolts in their respective holes and then add (4) painted brass P.E. square
nuts. Then trim the excess length on the bolt shafts by using a spar square nut on the shaft
as a guide and cut with end cutters and file flush with spare nut.
Glue the two (2) cast 90 degree brackets to the bottom of the two apron formers using 3.
round tooth picks inserted from the front surface of the apron. When bracket glue is dry add
four (4) 3/8” round head bolts through the front surface of the apron and square nuts and
trim excess off of the bolt shafts. Allow complete assembly glue joints to set.
Glue apron with 90 degree brackets in place to platform with bottom edge of apron flush
4.
to spring bar brackets and bottom edge of front platform cross brace aligning 90 degree
bracket holes with platform holes using round toothpicks. (See Photo 12)