2.8 Mounting the D22M Vandalism Set
In order to install the Vandalism Set, replace the regular outer shell and the Allen
screws with the stainless steel shell, the security screws and the four spacers of the
Vandalism Set. Likewise, replace the dome of the D22M-IT/Secure with the rein-
forced dome of the Vandalism Set.
•
Remove the outer shell
. Remove all four
Allen screws using the supplied Allen wrench.
Take off the outer shell.
•
Remove the camera dome
. Remove the
dome of the D22M-IT/Secure (by turning it in
counter-clockwise direction), then package
and store the dome.
• If required,
clean the lens
gently using a lint-free cotton cloth. Do not apply
excessive pressure onto the glass surface when cleaning the lens! Make
sure that you do not change the lens focus or the lens unit when doing so.
You should once again control the sharpness of the camera images on a
computer monitor.
•
Mount the reinforced dome of the Vandal-
ism Set
. Use a soft cotton cloth and mount
the reinforced dome by placing the dome into
its seat and turning it in clockwise direction. If
required, clean the dome gently using a lint-
free cotton cloth before installing it. You
should once again control the sharpness of
the camera images on a computer monitor.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
64
/108
D22M Camera Manual Part 1
