2.7 Mounting the D22M to a Ceiling Using the In-Ceiling Set
Before mounting the MOBOTIX D22M-IT/Secure to an indoor location using the In-
Ceiling Set, you need to prepare the network connection and drill the hole for the
camera:
•
Network connection
: The network cabling is supplied through the ceiling
directly above the camera.
When preparing the installation, you should make sure that you have at least
15 cm (6 in) of unused cable.
•
Hole for the camera
: Prepare the hole for the camera. The hole should have
a diameter of 150 mm (6 in)!
Procedure
•
Insert the camera into the In-Ceiling
mount without the outer shell and the
mounting ring
. The tapered guides on the
back of the D22M housing fit exactly into the
openings of the In-Ceiling mount.
•
Connect the network cable
to the network
cable of the camera
using a patch cable
connector
.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
62
/108
D22M Camera Manual Part 1
Find the drilling template
at the end of the manual
