MKS T3PIA, Инструкция по эксплуатации, Страница: 26 / 70

Chapter Two: Installation Electrical Information
18
The following parameters have default values that work for most applications, however they can be adjusted.
It is highly recommended that the following values only be adjusted after a Pump Speed LEARN function has
been conducted.
„
System Tau
„
Flow Observer Tau
„
Trajectory Tau
„
Trajectory shape
„
Pump Speed Pedestal
„
Speed Up option
5. Output Configurations
„
Process alarms (relays)
„ Encoder
Electrical Information
Connectors
The T3P throttle valve controller has four connectors located on its top panel (refer to Figure 4):
„
25-pin Female Type “D” Auxiliary Connector
„
15-pin Female Type “D” Analog (High) Sensor Connector
„
15-pin Female Type “D” Analog (Low) Sensor Connector
„
9-pin Male Type “D” Power Connector
Caution To prevent damage from electrostatic discharge (ESD) to the sensitive connector pins,
they must be covered with an ESD protective cover when not in use.