MKS elite 300, Руководство по эксплуатации

Страница: 23 / 55

System Installation
elite
TM
19
2.3 Rack Installation
To ensure proper operation of the elite
TM
, it is important to provide correct
mechanical support within a rack installation.
The full rack elite
TM
generator has integral rack mount brackets for 19" EIA
rack mounting. When rack mounting, the generator should be supported on
a rack shelf of adequate strength to support 11 kg (25 lbs). A ground wire or
braid must be connected from the generator ground stud on the rear panel
to the chassis ground on the cabinet.
For details, refer to the applicable Mounting and Outline Drawing as detailed
in section 2.1.4.
2.4 System Interconnect
The elite
TM
generator may be supplied with an analog or other remote
control interface. For interfaces other than the standard analog interface,
refer to the appropriate addendum to this manual for more information.
In order to maintain EMC compliance, cables should be constructed using Alpha
Supra ‐ Shield or equivalent cable and metallized backshells providing 360° shield
termination. Each of these options is described in detail below and the
appropriate pin ‐ out table is also given.