MKS elite 300, Руководство по эксплуатации

Страница: 35 / 55

System Installation
elite
TM
31
2.9 Power Requirements
The elite
TM
generator is designed to operate from a single ‐ phase AC supply.
The universal input allows any line voltage from 100V to 264V at 50Hz or
60Hz. While the typical application will utilize one ‘Hot’ conductor and one
‘Neutral’ conductor, both lines are internally fused and therefore if
necessary, the generator may be supplied from two ‘Hot’ conductors that
meet the AC voltage range for the unit (i.e. 220V single phase, two phases of
208V 3ph)
2.9.1 AC Mains Connection
An IEC 60320 C ‐ 13 style AC appliance inlet is supplied on the rear panel of
the generator. This allows connection of any number of linecords meeting
the IEC standard.
NOTE: Many off ‐ the ‐ shelf IEC 60320 linecords are not properly rated for the
current that the elite
TM
generator may draw at nominal line voltages and full
power output. To maintain safety compliance, any linecord utilized should
be able to carry at least 15amps.