MKN O7EMPF Series, Руководство по эксплуатации

Страница: 22 / 68

Operating the unit
22 Operating instructions
2. Press the "On Off" button.
Heating switches off.
The "Heating" indicator light goes out.
Unit cools down.
The unit is off.
4.3 Performing basic control setting
The control can be set only on models with EcoControl.
Changing parameters that are not indicated can lead to the
warranty possibly becoming void.
MKN does not assume any responsibility or liability for damage,
which is caused by unauthorized changing of parameters.
Claims against MKN that are due to this can not be upheld, not
even within the scope of the guarantee or warranty.
The basic setting for the unit is preset at the time of delivery. The
values can be changed. For an overview of the settings, see the
following list.
EcoControl basic control setting - Level 1: Bratt pan
Setting Parameter
s Standard
value Range of
adjustment Explanation
Program number Id 001 1—255 Without function
Automatic process
start APS 1 0 Deactivated, signal sounds
1 Activated, no signal at process start
Without function dt_ --- --- Without function
Without function tc_ --- --- Without function
Altitude H__ 0 0—30 Altitude in 100 m increments
Set the temperature
unit F__ 0 0 Degrees Celsius ( °C)
1 Degrees Fahrenheit ( °F)
Process start at
overtemperature PSO 0 0 Process start only if set temperature
reached
1 Process start even if temperature is above
set value
2021441-20ABBE-B