Transporting the unit
17
Installation instructions
4.2 Unpacking the unit
CAUTION
Risk of injury from sharp edges
•
Wear protective gloves.
When unpacking the unit, inspect it for transport damage.
Do not install damaged units or put into service.
1. Remove the packaging.
2. Pull the protective film off the unit.
3. Remove the packaging material from the cooking zone
completely.
4. Clean the unit (See Operating instructions).
5. Enter the information from the nameplate into the Commissioning
report.
6. Enter the information from the nameplate into the Operating
instructions.
4127002--0AIBE-C
