Troubleshooting
47/47
13 Specifications
Specifications
Wavit11
User’s Manual
Does not communicate
in all modes.
The configuration tool
does not start.
The setting is not feasi-
ble with the configura-
tion tool.
Has an unusable IP
address been set?
I forgot the password.
Move the units closer toge- If they communicate when they
ther and see if they commu- are closer, they were initially set
nicate in all modes.
too far apart. If they still do not
communicate in all modes, please
check settings. Check "Range" on
the next page for approx. distance.
What operating system
WiIE4.01 or above is
are you using?
required for the configuration tool.
Do any Wavit11s appear on Connect a personal computer to
the screen in the top win-
Wavit11 through a 10BASE-T
dow of configuration tool?
straight cable.
Is TCP/IP protocol installed Refer to the User’s Manual of the
in your personal computer?
personal computer to install
TCP/IP protocol in your personal
computer.
Is the network address for
Open the configuration tool, and
the Wavit11 IP address the
change the IP address so that it
same as that of the per-
matches the network address.
sonal computer?
Open the configuration tool After initialization, you need to
and perform initialization.
reset all configurations.
Open the configuration
After initialization, you need to
tool and perform initiali-
reset all configurations.
zation.
Situations
Verifying
Measures
Item
Specification
Frequency
2,400 -2,483.5MHz
Channel
11
Modulation
CCK (Complementary Code Keying)
Interface
10BASE-T
Data Rate
11Mbps/5.5Mbps/2Mbps/1Mbps
Receive Sensitivity
-83dBm(11Mbps, FER=8x10-2)
Output Power
15dBm
Temperature Range
0-40 Celsius
Standards
ARIB STD-T66
IEEE 802.11b
Supply Voltage
5.0V
Consumption Current
TX: 600mA
RX: 330mA
Size
65(W) x88(D) x 29.9(H) mm, Antenna is excluded
Weight
110g
Range
Data Rate
Indoor
Outdoor
11Mbps
30m
60m
5.5Mbps
40m
80m
2Mbps
50m
100m
1Mbps
60m
120m
These ranges are estimates from the general environment. For Wavit11 installation,
refer to the above and confirm communication.
Performance:
Performance is measured on the application. Performance varies
depending on PC power, network interface card power, installation environment,
wireless network traffic and external noise. If the setting has been made in Ad Hoc,
Windows SE and TCP/IP protocol, the highest performance of the Wavit11 will be
given at around 5Mbps.
Contact tech support
1-800-MITSUMI
[email protected]
