Setting Up Both Mode
If there is an Access Point, Wavit11 in the Both mode will operate as Wavit11 in
the Infrastructure mode. If there is no Access Point, Wavit11 in the Both mode
will operate as Wavit11 in the Ad Hoc mode.
Setting Up Wavit11
24/47
7.5
[STEP 1]
Click “Setup” in the “Wavit11 Wireless LAN” window.
[STEP 2]
Click the “Property” page.
Setting Up Wavit11
Wavit11
User’s Manual
NOTE
:
When Wavit11 is in the Both mode, it cannot operate both Infrastructure LAN
and Ad-Hoc LAN simultaneoulsy. When Wavit11 is in the Both mode, it
decides whether or not there is an Access Point when booting. After this, it
decides whether it should connect to Access Point or join Ad-Hoc LAN. To
connect to Access Point after joining Ad-Hoc LAN, Wavit11 must be rebooted.
AP Mode
Router
Internet
Both Mode
Ad Hoc Mode
Ad Hoc LAN
Both Mode
Infrastructure LAN
Infrastructure Mode
