[STEP3]
In the “Property” page, change the Operational Mode to “Ad Hoc”,
select a Channel, then click the “Apply” button.
[STEP 4]
Click the “OK” button.
Setting Up Wavit11
20/47
[STEP5]
In the “Status” page, check that the Operational Mode is set to “Ad
Hoc” and that the Channel is set correctly. Then click the “OK” button.
[STEP6]
After returning to the “Wavit11 Wireless LAN” window, check that all
setups you have selected are correct. Then close the Wavit11 Configuration
Utility.
Setting Up Wavit11
Wavit11
User’s Manual
NOTE
:
All Wavit11s in the Ad-Hoc mode should have the same Channel. If they
have different Channels they will not be able to communicate with each
other.
NOTE
:
If a selection is not reflected, click “Search”.
