Mitsubishi SRK100VNXWPZSX, Руководство по обслуживанию

Страница: 10 / 202

-
9
-
'20 • PAC-SM-351
Unit display section
OPERATION MODE select button
ALLERGEN CLEAR button
ON/OFF (luminous) button
TEMPERATURE button
AIR FLOW (UP/DOWN) button
TIME SET UP switch
SLEEP button
CLEAN switch
ON TIMER button
TIMER button
ACL switch
PROGRAM button
Operation section
HI/ECO button
AIR FLOW (LEFT/RIGHT) button
SILENT button
OFF TIMER button
WEEKLY button
FAN SPEED button
3D AUTO button
NIGHT SETBACK button
SET/Child Lock button
CANCEL button
Transmission section
Each time the button is pressed, the mode
changes.
•The above illustration shows all controls, but in
practice only the relevant parts are shown.
This button selects ALLERGEN CLEAR
operation.
Press to start operation, press again to
stop.
This button sets the room temperature.
This button changes the air flow (up/down)
direction.
This switch is for setting the time.
This button selects SLEEP operation.
This switch selects the CLEAN
operation.
This button selects ON TIMER operation.
This buttions is used for setting the cur-
rent time and timer function.
Switch for resetting microcomputer.
This button sets WEEKLY TIMER.
This button changes the HIGH POWER/
ECONOMY operation.
This button changes the air flow (left/right)
direction.
This buttion changes the SILENT
operation.
This button selects OFF TIMER
operation.
This button switches the WEEKLY
TIMER to ON/OFF.
Each time the button is pressed, the fan
speed changes.
This button sets 3D AUTO operation.
This button sets NIGHT SETBACK
operation.
Use this button to set the timer and
Child Lock.
This button cancels the ON timer, OFF
timer, and SLEEP operation.
3D AUTO light (green)
Illuminates during 3D AUTO operation.
TIMER light (yellow)
Illuminates during TIMER operation.
This button can be used for turning on/off the unit when
a remote control is not available.
Remote control signal receiver Unit ON/OFF button
•
Illuminates during operation.
• Blinks when airfl ow stops due to the ‘HOT
KEEP’, ‘CLEAN operation’ and ‘operation
mode invalid ’.
ON
OFF
1.5 sec.
0.5 sec.
HOT KEEP
3 sec.
1 sec.
ON
OFF
CLEAN operation
Operation mode
invalid
ON
OFF
0.5 sec.
0.5 sec.
HI POWER light (green)
Illuminates during HIGH POWER operation.
RUN (HOT KEEP) light (green)
This button can be used for turning on/off
the unit when a remote control is not available.
Wireless remote control signal receiver
Unit ON/OFF button
RUN light (green)
•
RUN lights blink quickly during invalid operation mode.
•
Illuminates during operation.
•
Blinks slowly when SELF CLEAN operation (3 seconds ON, 1 second OFF).
•
Blinks when airflow is stopped to prevent blowing out of cold
air in heating operation. (1.5 seconds ON, 0.5 seconds OFF)
•
Blinks slowly when AUTO OFF operation during stand by
(3.5 seconds ON, 0.5 second OFF).
Unit display section
TIMER light (yellow)
Illuminates during TIMER operation.
(a) Models SRK50ZSX-W, 60ZSX-W
(b) Models SRK 100ZR-W