Mitsubishi SD200U, Руководство по обслуживанию

Страница: 37 / 108

- 5 -
Warning dialog window
Goes back to the
main dialog window. Clears all the
warning history data. Creates a
detailed report.
All the error items are
displayed in red and their
check boxes are checked.
Indicates which data of the
Warning History 1, 2, or 3 are
displayed. Displays the SET TIME
when the warning history
data were saved.
(3) Warning dialog window
1. The warning dialog window displays the error location.
2. “ERROR TIME (SET TIME)” displays the time when the
warning history data has been saved (the SET TIME in
the service menu). “ERROR TIME” and “SET TIME”
shown in the main dialog window are useful to know
when the error occurred.
3. Pressing the Detail button activates the Notepad and
opens the file containing the information about the set
and the warning data. To prevent writing over this file,
be sure to select “Save As” from “File” of the menu in
the Notepad to save the file. The name of the file being
displayed should be “DataTemp.txt”.
4. Pressing the Warning Clear button displays the
confirmation message window, which asks you whether
you will clear the warning history data. Press the OK
button to clear the warning history data or the Cancel
button to cancel clearing them.
5. Pressing the Back button displays the main dialog
window again and carries out communication with the
projector again to get information from it.
(4) Switching the COM port
1. Select the serial port to which the cable is being
connected. When the selected serial port isn’t available
or doesn’t exist, an error message window is displayed.
2. Press the OK button to switch the COM port. When the
serial port is switched correctly, communication with the
projector is carried out again to get information from it.
COM port switching dialog window