- 3 -
How to display the FUNCTION menu
1. Select [Language] on the OPTION menu.
2. Press the [ENTER/STILL], [+], and [ENTER/STILL] buttons on the remote control in order, and the FUNCTION menu will be
displayed..
How to exit the FUNCTION menu
Press the [MENU] button to exit the FUNCTION menu.
Note:
Selecting [RESET ALL] on the OPTION menu doesn’t initialize the settings of the FUNCTION menu. To initialize them,
carry out the procedure for reset to the factory settings. Press the [POWER], [COMPUTER], and [AUTO POSITION]
buttons on the projector at the same time for three seconds.
FUNCTION MENU (SETTING MENU ONLY FOR SERVICE)
Following are the reference of the life times of the consumable parts.
• Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 1,500 hours
• Color Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 7,500 hours
• Cooling Fan (Power) . . . . . . . . . . . . . . . . . . . . Approx. 10,000 hours
• Cooling Fan (DMD) . . . . . . . . . . . . . . . . . . . . . Approx. 5,000 hours
• Cooling Fan (Lamp) . . . . . . . . . . . . . . . . . . . . . Approx. 5,000 hours
• Cooling Fan (Optical Unit) . . . . . . . . . . . . . . . . Approx. 7,000 hours
LIFE TIME OF THE CONSUMABLE PARTS
ITEM
TEST PATTERN
WHITE, BLACK,
CROSS HATCH,
RED, GREEN,
BLUE, YELLOW,
CYAN, MAGENTA
Function
To display test signal
Pressing the [ENTER]
button displays the test
pattern. Pressing any
button cancels the test
pattern.
WHITE
No
Y/C DELAY
±4
To adjust the amount of DELAY of Y and C of the
VIDEO signal. (Only the VIDEO signal that is input
to the S-VIDEO or VIDEO terminal is adjusted.)
This item is normally
set to 1. Optimize this
setting using a color bar
signal or a video signal.
1
Yes
INTERLACE INV
ON/OFF
Not used normally.
This item is used when interlace of the video signal is
inverted in the video mode 4.
ON : Normal
OFF : Inverse
ON
Yes
C/W DELAY
0 ~ 1023
This item is used when the optical unit is replaced.
Do not change the setting value normally because it
has been uniquely set for each projector. Improper
change will cause incorrect colors.
Unique
value
Yes
INPUT SCAN
ON/OFF
For the shootout function.
When this item is set to ON, COMPUTER1 and
VIDEO1 are toggled when no signal has been
detected and the terminal to which a signal is supplied
will be automatically detected to display the signal.
ON : Shootout
OFF : Normal
OFF
Yes
MACRO VISION
ON/OFF
Not used normally.
Select OFF only when a display error has occurred in
the sync system with 525P or 625P signal having no
macrovision signal.
ON : Normal
OFF : Macro vision
function OFF
ON
Yes
V DELAY
ON/OFF
When vertical jitters occur, toggle this item ON and
OFF.
ON : V DELAY ON
OFF : Normal
OFF
Yes
ANIMATION
MODE
ON/OFF
Not used normally.
An NTSC animation image of 30 frames is displayed
in the cinema mode. When this item is set to ON, the
cinema mode operates forcefully.
ON : ANIMATION
MODE
OFF : Normal
OFF
Yes
Last
memory
Default
setting
Setting range
Содержание SD200U
Страница 108: ......
