Mitsubishi SD200U, Руководство по обслуживанию

Страница: 66 / 108

- 8 -
2. Removal of TOP CASE ASSY
1. Remove the Front Grill following “1. Removal of FRONT
GRILL”.
2. Remove the six (
b
) screws as shown in Fig. 3-1.
3. Remove the Top Case Assy as shown in Fig. 3-1.
Note: Also remove the CR connector on the IRR PCB
ASSY, the KT connector on the KEY PCB ASSY
when removing the Top Case Assy.
1. Removal of FRONT GRILL
1. Remove the (
a
) screw as shown in Fig. 3-1.
2. Remove the Front Grill as shown in Fig. 3-1.
a
x1
b
x3
x1
b
x1
b
x1
b
Top Case Assy
Front Grill
Fig. 3-1
DISASSEMBLY
3. Removal of SIGNAL PCB ASSY and
FORMATTER PCB ASSY
1. Remove the Front Grill following “1. Removal of FRONT
GRILL”.
2. Remove the Top Case Assy following “2. Removal of
TOP CASE ASSY”.
3. Remove the two (
a
) screws, the three (
b
) screws and
the SIGNAL PCB ASSY as shown in Fig. 3-2.
4. Remove the four (
C
) screws and the FORMATTER
PCB ASSY as shown in Fig. 3-2.
c
x4
b
x3
a
x2
SIGNAL PCB ASSY
SIGNAL B Holder
SIGNAL
A Holder
FORMATTER
PCB ASSY
Fig. 3-2