Mitsubishi LGH-100RX5-E, Руководство пользователя

Страница: 31 / 123

Type
—31—
Pulse input setting
“oFF” SW2-2: OFF Charged 12 V DC/24 V DC
Operation signal: 12 V DC/24 V DC
Stop signal
: 0 V
Uncharged a-contact
(Current drawn: 10 mA or greater)
Operation signal: Close
Stop signal
: Open
Level signal
Pulse input setting
“on” SW2-2: ON Charged 12 V DC/24 V DC
Uncharged a-contact
Start/stop is inverted with each
pulse
Pulse signal
PZ-60DR-E
(Lossnay remote
controller) can-
not be used. SW2-2: OFF • Connect the signal cable of Mr. Slim to Lossnay, and per-
form the Lossnay interlock settings from the A-control
remote controller or the K-control remote controller.
• The system is started/stopped by interlocking with
Start/Stop of the A-control remote controller or K-control
remote controller.
• The system is started/stopped by interlocking with the venti-
lation setting of the A-control remote controller.
• The Mr. Slim operation mode, target temperature, and other
internal information can also be brought in.
Systems
interlocked
with Mr.
Slim
Pulse input setting
“oFF” SW2-2: OFF • City Multi indoor units and Lossnay are connected by M-
NET, and the Lossnay interlock setting is performed from
the remote controller or system controller.
• The system is started/stopped by interlocking with
Start/Stop of the MA remote controller or ME remote con-
troller and the ventilation setting.
• The City Multi indoor unit operation mode, target tempera-
ture, and other internal information can also be brought in.
Systems
interlocked
with
Mitsubishi
City Multi
indoor units
(5) Interlocking with external devices
1
Input signal
The system will interlock with the following input signals from external devices and start/stop.
systems having multiple Lossnay units, input the signal to the “Main” Lossnay.
Multiple units
PZ-60DR-E
(Remote controller
function selection)
PZ-60DR-E Not Used
(Function selec-
tion switch)
Signal, and operation
Setting Method
Pulse width 200 ms or greater
6
Ventilation mode change recommendation (RECOMMENDED, VENTILATION MODE) display
When using PZ-60DR-E and the ventilation mode is set to Lossnay ventilation or bypass ventilation, “REC-
OMMENDED” and “VENTILATION MODE” may be displayed alternately (for 10 minutes maximum). This
function informs the user of the suitable ventilation mode according to the automatic ventilation algorithm.
When a ventilation mode change recommendation has been displayed, more comfortable ventilation can be
provided by pressing the “Function selector” button of the remote controller and switching to another ventila-
tion mode.
(We recommend that “AUTO” be selected for the ventilation mode; however, there is no problem in leaving
the ventilation mode unchanged with “RECOMMENDED” “VENTILATION MODE” displayed.)