46
47
Setup Menu: Edit NetCommand® Button, Icon Position
Edit NetCommand Button
(Figure 11)
Edit NetCommand button displays the Edit
NetCommand Menu (refer to Edit NetCommand section
in Part of this book.) Edit NetCommand provides the
following options:
• ADD - Addition of new devices.
• CHANGE - Change or edit traditional devices and
IEEE devices.
• DELETE - Delete a single device or delete the
entire setup configuration.
• REVIEW - Review all devices connected to the
HDTV Receiver, including IEEE devices and
turn devices and unused inputs On or Off.
• INITIAL - Allows initial setup, in the event
NetCommand setup was cancelled or if the entire
configuration was deleted.
Figure 11. Setup Menu.
Figure 12. Icon Position Menu.
Icon Position Menu
(Figure 12)
Arrange the order of the device icons shown on the Device
Selection Menu using the Icon Position menu screen on
the Setup menu. Display a preferred sequence to make the
operation of the HDTV Receiver easier.
Use ADJUST , , , or to highlight the icon to be
moved and then press ENT. Use ADJUST , , , or
to move the icon to the desired position and then press
ENT to secure the icon in the new position.
