22
23
DTV Receiver to HD-5000 HDTV Receiver Back
Panel
• G
(green) to Y/G
• R
(red) to Pr/R
• B
(blue) to Pb/B
Note:
If the DTV receiver has outputs for H and V
sync, connect as listed below (DO NOT connect if
DTV receiver uses “Sync on Green”
•
H
(horizontal sync) to H
•
V
(vertical sync) to V
. Connect the L (left) and R (right) audio cables from
the DTV receiver to Input-DTV AUDIO on the HD-
HDTV Receiver back panel.
Connecting an External Digital TV (DTV, HDTV or DBS) Receiver,
continued
External DTV or DBS Receiver with
RGB Video Connections
(Figure 13)
. Connect the outside antenna, cable or satellite to ANT
or SATELLITE IN on the DTV receiver (see your
DTV receiver owner’s guide for instructions and cable
compatibility).
. Connect the incoming terrestrial antenna or cable
(not satellite) to ANT-A on the HD- HDTV
Receiver back panel (a coaxial splitter, available at most
electronic supply stores, may be required to complete
this installation).
. Connect RGB cables for the DTV receiver to Input-
DTV on the HDTV Receiver back panel.
Note:
You may need to set the Input-DTV
assignment to RGB instead of Y/Pr/Pb. Refer to
the Edit NetCommand® Setup for instructions on
changing this setting.
See Appendix B for RGB video signal compatibility information.
For digital audio connections, see your DTV Receiver and A/V Receiver Owner’s Guides.
IMPORTANT
Figure 13. Connecting the DTV receiver with RGB video connections
