EN-41
5. Select OK, and NEW NETWORK PASSWORD
screen appears if the entered password is correct.
• If the entered password is not correct,
CURRENT NETWORK PASSWORD screen
appears again.
CONFIRM NETWORK PASSWORD
A
OK
caps
CLEAR
DEL
CANCEL
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0
1
2
3
4
5
6
7
8
9
←
→
↔
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
NEW NETWORK PASSWORD
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
6. Enter the NEW NETWORK PASSWORD and
CONFIRM NETWORK PASSWORD.
• Password can be set using up to 32 characters
including alphabets (capital/small) or numeric
characters.
key: ............. Shifting the position of enter
cursor to the left for each
character.
key: ............. Shifting the position of enter
cursor to the right for each
character.
key: ............... Shifting the position of
enter cursor between NEW
NETWORK PASSWORD
and CONFIRM NETWORK
PASSWORD.
DEL key: .......... Deleting the character in the
position of enter cursor for each
character.
caps/CAPS key: Switching an alphabet character
to CAPITAL or small.
CLEAR key: ..... Deleting all the entered
characters.
7. When NEW NETWORK PASSWORD and CONFIRM
NETWORK PASSWORD are matched, the setting
is completed after changing the NETWORK
PASSWORD.
• When you select CANCEL, the NETWORK menu
is displayed without changing the password.
• If the entered content is not matched, NEW
NETWORK PASSWORD screen appears again
after an error dialog is displayed.
• It may take some time to refl ect the settings.
Initial network settings (continued)
IP Settings
(See page 26 for menu setting.)
1. Display the NETWORK menu.
2. Press the
or
button to select IP CONFIG.
IP CONFIG
ENTER
3. Press the ENTER button.
• IP CONFIG menu appears.
NETWORK
IP CONFIG
opt.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
192. 168. 1. 10
MAC ADDRESS
SAVE SETTINGS
OFF
ON
255. 255. 255. 0
192. 168. 1. 11
192. 168. 1. 254
OK
DHCP FUNCTION
START IP ADDRESS
END IP ADDRESS
192. 168. 1. 10
• The default setting of each item is as follows:
DHCP
OFF
IP ADDRESS
192.168.1.10
SUBNET MASK
255.255.255.0
DEFAULT GATEWAY
192.168.1.10
DHCP FUNCTION
ON
START IP ADDRESS
192.168.1.11
END IP ADDRESS
192.168.1.254
Setting or Clearing DHCP
1. Display the IP CONFIG menu.
2. Press the
or
button to select DHCP.
DHCP
OFF
3. Press the
or
button to select ON or OFF.
• When setting DHCP to ON, IP ADDRESS,
SUBNET MASK, DEFAULT GATEWAY, and
DHCP FUNCTION cannot be set. If you set
those settings, set DHCP to OFF and perform
the IP settings as the following procedures.
• Until the execution of SAVE SETTING, the
change is not saved.
