Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 321 / 548

NOTE
l The mode of the detection area can be
switched only when the select position is in
the “R” (REVERSE) position.
l The detection area will not change if you
keep the “SONAR” switch pressed for 10
seconds or more.
l After pressing the “SONAR” switch, the
parking sensors operation differs according
to the detection area setting.
• Setting when towing bar is not equipped
When the selector lever is moved to the
“R” (REVERSE) position, the parking
sensors will operate even if the parking
sensors operation was stopped by pressing
the “SONAR” switch.
• Setting when towing bar is equipped
When the parking sensors operation was
stopped by pressing the “SONAR”
switch, the parking sensors will not oper-
ate until the Plug-in Hybrid EV System
has been stopped even if the select posi-
tion is put to the “R” (REVERSE) posi-
tion.
To resume the parking sensors operation,
press the “SONAR” switch or stop and re-
start the Plug-in Hybrid EV System, and
then put the select position to the “R”
(REVERSE) position.
Warning display
E00648300125
In case there is a malfunction in the parking
sensors, the display for the malfunctioning
sensor will blink and the warning buzzer will
sound for approximately 5 seconds.
Example: Corner sensor (left) malfunctioning
Even after the buzzer and display has stopped
warning, the indication lamp (A) on “SO-
NAR” switch will continue blinking until the
system reverts to the normal state. Have the
vehicle inspected at a MITSUBISHI
MOTORS Authorized Service Point.
Rear-view camera*
E00618402310
The rear-view camera is a system that shows
the view behind the vehicle on a screen of the
DISPLAY AUDIO, the Smartphone Link
Display Audio or the MITSUBISHI Multi-
Communication System (MMCS).
Rear-view camera*
7-102
OGGE17E1
Starting and driving
7