Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 318 / 548

Corner and back sensor loca-
tions
There are 8 sensors (A) in the front and rear
bumper.
Detection areas
Depending on whether the vehicle is equip-
ped with a towing bar, you can change the
parking sensors between the standard mode
and the towing bar mode. The towing bar
mode changes the system to exclude the area
in which the towing bar is mounted from the
detection areas.
Vehicles without a towing bar
The detection areas are within approximately
60 cm (A) from the front and corner sensors
and 125 cm (B) from the back sensors.
Vehicles with a towing bar
The detection areas are within approximately
60 cm (A) from the front and corner sensors
and 125 cm (B) from the back sensors. The
non-detection areas (C) are within approxi-
mately 20 cm (D) from the bumper.
NOTE
l The sensors do not detect objects located in
the area directly below or near the bumper.
If the height of an object is lower than the
mounted position of the sensors, the sensors
may not continue detecting it even if they
detected it initially.
For information on how to change the detec-
tion areas, please refer to “Changing the de-
tection areas” on page 7-97.
Parking sensors (Front/Rear)*
7-99
OGGE17E1
Starting and driving
7