Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 190 / 548

Other interrupt displays
E00524202211
Screen System operation status Reference
l When you pressed the power switch and
the operation mode become the ACC
without depress the brake pedal, this
screen is displayed.
This screen will be displayed repeatedly
at regular intervals while the operation
mode of the power switch is put in ACC.
l Place the select position in the “P” (PARK)
position, depress the brake pedal more
firmly than usual with the right foot. Then,
press the power switch.
Refer to “Starting and stopping the Plug-in
Hybrid EV System” on page 7-14.
l When Plug-in Hybrid EV System does
not start even if the operation mode of the
power switch is put in ON, this screen is
displayed.
l When starting the Plug-in Hybrid EV Sys-
tem, you pressed the power switch with-
out select position in the “P” (PARK) po-
sition. l Place the select position in the “P”
(PARK) position by pressing the electrical
parking switch, depress the brake pedal
more firmly than usual with the right foot.
Then, press the power switch.
Refer to “Starting and stopping the Plug-
in Hybrid EV System” on page 7-14.
l Driving power is restricted by the safety
system as the Plug-in Hybrid EV System
has become too hot or too cold. l You do not have to take any actions. The
restriction on the driving power will be re-
leased when the Plug-in Hybrid EV Sys-
tem returns to the normal temperature.
Indication lamp, warning lamp, and information screen display list
6-43
OGGE17E1
Instruments and controls
6