Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 167 / 548

NOTE
l If “---” is selected in the language setting, a
warning message is not displayed when
there is a warning display or interrupt dis-
play.
Changing the language cooper-
ative control
E00523301696
The language used in MITSUBISHI Multi-
Communication System (MMCS) (if so
equipped), Bluetooth
®
2.0 interface (if so
equipped) or Multi Around Monitor (if so
equipped) can be changed automatically to
the same language as that shown in the multi
information display.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “ ” (language co-
operative control).
3. Press and hold the multi information dis-
play switch to switch from A/1 (lan-
guage cooperation enabled) to M/2/P
(language cooperation disabled), or from
M/2/P to A/1.
The setting is changed to the selected
condition.
NOTE
l The language display modified with the lan-
guage setting can be switched in the follow-
ing manner.
NOTE
• When A or 1 has been selected with the
language cooperative control, the lan-
guage for MITSUBISHI Multi-Communi-
cation System (MMCS), Bluetooth
®
2.0
interface or Multi Around Monitor is au-
tomatically changed to the language se-
lected for the multi information display.
However, this changing function may not
work depending on the language selected
for the multi information display.
• When M, 2 or P has been selected with
the language cooperative control, the lan-
guage for MITSUBISHI Multi-Communi-
cation System (MMCS), Bluetooth
®
2.0
interface or Multi Around Monitor is not
automatically changed to the language se-
lected for the multi information display.
l The language on the display of the audio
system (if so equipped) is not automatically
changed even if you select A or 1 of the lan-
guage cooperation control.
Operation sound setting
E00523400690
You can turn off the operation sounds of the
multi information display switch and rheostat
illumination button.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing function settings” on
page 6-16
Multi information display
6-20
OGGE17E1
Instruments and controls
6