Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 291 / 548

l Automatic high-beam system
CAUTION
l To maintain proper performance of the
FCM, LDW and Automatic high-beam sys-
tem:
• Always keep clean the windscreen.
If the inside of the windscreen where the
sensor is installed becomes dirty or fog-
ged, contact a MITSUBISHI MOTORS
Authorized Service Point.
•
Do not apply an impact or load on the
sensor or its surrounding area.
CAUTION
• Do not put anything including a sticker or
film on the windscreen in front of or sur-
rounding the area of the sensor.
• Do not attempt to detach or disassemble
the sensor.
• If the windscreen is misted, remove the
mist from the windscreen by using the de-
mister switch.
• Maintain the wiper blades in good condi-
tion.
Refer to “Wiper blades” on page 10-06.
When replacing the wiper blades, use on-
ly MITSUBISHI MOTORS GENUINE
parts or equivalent.
• Do not dirty or damage the sensor.
• Do not spray glass cleaner on the sensor.
Also, do not spill liquid, such as a bever-
age, on the sensor.
• Do not install an electronic device, such
as an antenna, or a device that emits
strong electric waves near the sensor.
•
Always use tyres of the same size, same
type and same brand and that have no sig-
nificant wear differences.
CAUTION
• Do not modify the vehicle’s suspensions.
l If the windscreen on the sensor or in the sur-
rounding area of the sensor is cracked or
scratched, the sensor may not detect an ob-
ject properly. This could cause a serious ac-
cident. Turn off the FCM and have your ve-
hicle inspected as soon as possible at a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
If you need to replace the windscreen, con-
tact a MITSUBISHI MOTORS Authorized
Service Point.
l
The sensor emits infrared rays when the op-
eration mode is in ON. Do not look into the
sensor by using optical goods such as a mag-
nifying glass. The infrared ray might injure
your eyes.
Laser radar specifications
Laser classification
Max average power 45 mW
Pulse duration 33 ns
Wavelength 905 nm
Divergent angle (ho-
rizon x vertical) 28° x 12°
Forward Collision Mitigation System (FCM)*
7-72
OGGE17E1
Starting and driving
7