Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 49 / 548

NOTE
• Do not repeat charging near the full
charge level.
l The quick charging gives priority when the
normal charging and the quick charging are
performed at the same time. At this time, the
normal charging will be stopped.
l Even if the operation mode of the power
switch is OFF, you may hear the operating
sound of the cooling fan for cooling the
drive battery during charging.
This is not a malfunction.
l If your vehicle is not used for a long time,
check the energy level gauge every 3
months. If the gauge shows 0, charge the
drive battery until some indication appears.
Alternatively, start the Plug-in Hybrid EV
System. Then the engine will automatically
start to charge the drive battery. Wait until
the engine automatically stops, then put the
operation mode of the power switch in OFF.
l In the event of an electrical power outage
while charging, charging restarts automati-
cally with the restoration of electricity.
Charge port courtesy lamp
E08304300072
The charge port courtesy lamp (A) illumi-
nates when the charging lid is opened while
the select position is in the “P” (PARK) posi-
tion. It goes off automatically after a few sec-
onds. If you want to turn it on again, press
the charge port courtesy lamp switch (B).
When charging is started, the charge port
courtesy lamp blinks 3 times and then goes
off automatically.
NOTE
l The charge port courtesy lamp illuminating
time can be adjusted.
For details, please consult a MITSUBISHI
MOTORS Authorized Service Point.
l If the MITSUBISHI Remote Control (if so
equipped) is operated when the charge port
courtesy lamp is off, the lamp may illumi-
nate.
Basic knowledge for charging
3-06
OGGE17E1
Charging
3