Mitsubishi MOTORS Outlander 2007, Руководство по обслуживанию, техническая информация и данные по ремонту кузова

Страница: 356 / 473

DESCRIPTION OF CONSTRUCTION AND OPERATION
Rear wiper control [Initial condition: 8 seconds (without successive operations)]
ZC5013040000
t
ON
OFF
ON
OFF
ON
OFF
T2
T3 T2 T3
T1
T4 T4
T1
T4 T4 T4
T3
T2 T2 T2
T2: 7.4 seconds
Rear wiper drive signal
Rear wiper switch
Inhibitor switch "R" position
T1: 3.0 seconds
t: 1.0 second T3: 8.0 seconds
T4: 0.6 second
When the rear wiper switch on the column switch
is turned ON while the ignition switch is in ACC or
ON position, ETACS turns the rear wiper drive
signal ON for 3 seconds (for approximately 2
cycles) and operates the intermittent action in 8
second intervals.
When the selector lever is moved to R (reverse)
position during the rear wiper operation, the
transmission range switch R (reverse) turns ON,
and one second after that, ETACS turns the rear wiper drive signal ON for 3 seconds (for
approximately 2 cycles), and operates the
intermittent action in 8 second intervals again.
By the special operation of the rear wiper switch
on the column switch (2 consecutive operations),
the rear wiper can operate continuously regardless
of the set intermittent time.
016'
7UKPIVJGEQPHKIWTCVKQPHWPEVKQPVJGTGCT
YKRGTKPVGTOKVVGPVVKOGECPDGCFLWUVGF4GHGT
VQ2
Rear wiper linked with washer function Initial condition: with function
ZC5013050000
t : 0.3 second
T4 : 0.6 second
T1 : 3 seconds T2 : 7.4 seconds
T3 : 8 seconds
t
t
t
ON
OFF
ON
OFF
ON
OFF
T1 T1 T1
T2
T3
T4 T4
Rear wiper switch
in OFF position Rear wiper switch in ON position
Rear washer switch
Rear washer relay
Rear wiper drive
signal
When the rear washer switch on the column switch is
turned ON while the ignition switch is in ACC or ON
position, ETACS turns the rear washer relay ON.
':6'4+14
4'#49+2'4#0&9#5*'4