Mitsubishi MOTORS Mirage 2012, Руководство пользователя

Страница: 48 / 250

2. Raise the seatbacks until it locks securely in-
to place.
Push lightly on the seatbacks to confirm that
it has actually been secured.
Head restraints
E00403301644
WARNING
l
Driving without the head restraints in
place can cause you and your passengers
serious injury or death in an accident. To
reduce the risk of injury in an accident, al-
ways make sure the head restraints are in-
stalled and properly positioned when the
seat is occupied.
l Never place a cushion or similar device
on the seatback. This can adversely affect
head restraint performance by increasing
the distance between your head and the
restraint.
l
When a person sits in the rear seat, pull
up the head restraint to a height at which
it locks in position. Be sure to make this
adjustment before starting to drive. Seri-
ous injuries could otherwise be suffered
as the result of an impact.
To adjust height
Adjust the head restraint height so that the centre
of the restraint is as close as possible to ear level to
reduce the chances of injury in the event of colli-
sion. Any person too tall for the restraint to reach
their seated ear level, should adjust the restraint as
high as possible.
To raise the head restraint, move it upward. To low-
er the restraint, move it downward while pushing
the height adjusting knob (A) in the direction of the
arrow. After adjustment, push the head restraint
downward and make sure that it is locked.
To remove
Lift the head restraint with the height adjusting
knob (A) pushed in.
To install
Confirm that the head restraint is facing the correct
direction, and then insert it into the seatback while
pressing the height adjusting knob (A) in the direc-
tion indicated by the arrow.
Seat and seat belts
2-04
OA0X13E4
2