Mitsubishi MOTORS Mirage 2012, Руководство пользователя

Страница: 110 / 250

[For vehicles with CVT]
1. Stop the vehicle.
2. Depressing the brake pedal. The engine will
stop automatically.
NOTE
l
When the engine is automatically stopped,
changes will occur in the driving operations.
Pay closel attention to the following.
• The brake booster becomes inoperative
and the pedal effort will increase.
If the vehicle is moving, press down the
brake pedal harder than usual.
• The electric power steering system (EPS)
becomes inoperative and it will become
harder to turn the steering wheel.
CAUTION
l Observe the following precautions when
the engine is stopped automatically. Oth-
erwise, an unexpected accident might oc-
cur when the engine restarts automatical-
ly.
CAUTION
• Do not depress the accelerator pedal
to race the engine while the vehicle is
stopped (regardless of whether the en-
gine is running or stopped).
Otherwise, an unexpected accident
might occur when the engine restarts
automatically.
• If the driver’s seat belt is unfastened
and driver’s door is opened or if the
bonnet is opened, the indication lamp/
indicator display will blink to inform
the driver and buzzer sounds (CVT).
If this occurs, the engine will not re-
start automatically, the seat belt is re-
fastened, driver’s door is closed and
the bonnet is closed. On vehicles with
M/T, while depressing the brake ped-
al, fully depress the clutch pedal to
start the engine.
On vehicles with CVT, while depress-
ing the brake pedal, move the selector
lever to the “P” (PARK) or “N” (NEU-
TRAL) position to start the engine.
For details, refer to “Starting” on
page 4-12.
CAUTION
• On vehicles with M/T, do not move
the gearshift lever to a position other
than the “N” (Neutral) position.
If the gearshift lever is moved to a po-
sition other than the “N” (Neutral) po-
sition, the indication lamp/indicator
display blinks and the buzzer sounds.
If the gearshift lever is returned to the
“N” (Neutral) position, the indication
lamp/indicator display stops blinking
and the buzzer stops sounding. The en-
gine will not restart if the gearshift lev-
er is in a position other than the “N”
(Neutral) position.
NOTE
l In the following cases, the Auto Stop & Go
(AS&G) system will not operate and the en-
gine will not stop automatically even if the ve-
hicle is stopped.
The indication lamp/indicator display will
not turn on.
• Driver’s seat belt is not fastened
• When the driver’s door is opened
• Bonnet is open
• After the engine restarts automatically,
the vehicle speed has not exceeded ap-
proximately 5 km/h (3 mph)
• After the engine start, approximately 30
seconds or more have not elapsed
• After the engine restarts automatically
and the vehicle stops again within 10 sec-
onds.
• Engine coolant temperature is low
Starting and driving
4-16
OA0X13E4
4