Mitsubishi MOTORS Mirage 2012, Руководство пользователя

Страница: 78 / 250

2. Each time you press the multi-information dis-
play switch for 1 second or more on driving
range display, you can switch reset mode for
average fuel consumption.
(A: Auto reset mode, B: Manual reset mode)
Auto reset mode Manual reset mode
Manual reset mode
l When the average fuel consumption is being
displayed, if you hold down the multi-infor-
mation display switch, the average fuel con-
sumption displayed at that time is reset.
l When the following operation is performed,
the mode setting is automatically switched
from manual to auto.
[Except for vehicles equipped with keyless
operation system]
Turn the ignition switch from the “ACC” or
“LOCK” position to the “ON” position.
[For vehicles equipped with keyless opera-
tion system]
Change the operation mode from ACC or
OFF to ON.
Switching to auto occurs automatically. If
switching to manual mode is done, however,
the data from the last reset is displayed.
Auto reset mode
l
When the average fuel consumption is being
displayed, if you hold down the multi-infor-
mation display switch, the average fuel con-
sumption displayed at that time are reset.
l
When the engine switch or the operation
mode is in the following conditions, the aver-
age fuel consumption display is automatical-
ly reset.
[Except for vehicles equipped with keyless
operation system]
The ignition switch is in the “ACC” or
“LOCK” position for about 4 hours or longer.
[For vehicles equipped with keyless opera-
tion system]
The operation mode is in ACC or OFF for
about 4 hours or longer.
NOTE
l The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
l
The memory of the auto reset mode or man-
ual reset mode for the average fuel consump-
tion display is erased if the battery is discon-
nected.
l
The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption display unit
E00523000768
The display unit for fuel consumption can be switch-
ed. The distance and amount units are also switch-
ed to match the selected fuel consumption unit.
1. When you lightly press the multi-informa-
tion display switch a few times, the informa-
tion display switches to the average fuel con-
sumption display.
Refer to “Information display” on page 3-03.
2. Press and hold the multi-information display
switch for about 5 seconds or more until buz-
zer sound is heard twice.
3. Press and hold the multi-information display
switch to switch in sequence from “km/L”
→ “L/100 km” → “mpg” → “km/L”.
NOTE
l
The display units for the driving range, the
average fuel consumption are switched, but
the units for the indicating needle (speedom-
eter), the odometer, the tripmeter and the serv-
ice reminder will remain unchanged.
l The memory of the unit setting is erased if
the battery is disconnected, and it returns au-
tomatically to factory setting.
The distance units is also switched in the following
combinations to match the selected fuel consump-
tion unit.
Fuel consumption Distance (driving range)
km/L km
L/100 km km
Instruments and controls
3-08
OA0X13E4
3