Mitsubishi MOTORS Mirage 2012, Руководство пользователя

Страница: 60 / 250

A- Vehicle seat cushion
B- Vehicle seatback
C- Lower anchorage
D- Connector
If your child restraint system requires the use
of a tether strap, fasten the tether strap in ac-
cordance with step 5.
5. Latch the top tether strap hook (E) of the
child restraint system to the tether anchorage
bracket (F) and tighten the top tether strap so
it is securely fastened.
6. Push and pull the child restraint system in all
directions to be sure it is firmly secured.
Installing a child restraint system to a
3-point type seat belt (with emergency
locking mechanism)
E00407100702
Installation:
1. Put a child restraint system on the seat in
which you wish to install it, and remove the
head restraint from the seat. Refer to “Head
restraints” on page 2-04.
2. When installing a child restraint system in
the front passenger seat, adjust seat slide to
its most rearward position.
3. Route the belt through the child restraint ac-
cording to the child restraint system manufac-
turer’s instructions, then insert the latch plate
into the buckle.
4. Remove all slack of a lap belt by pulling the
webbing through the belt’s adjustment feature.
3-point type seat belt requires no length ad-
justment, remove all slack by using the lock-
ing clip.
5. Before putting the child in the restraint, push
and pull the restraint in all directions to be
sure it is secure. Do this before each use.
WARNING
l For some types of child restraint, the lock-
ing clip (C) should be used to help avoid
personal injury during a collision or sud-
den manoeuvre.
It must be fitted and used in accordance
with the child restraint manufacturer’s in-
structions.
The locking clip must be removed when
the child restraint is removed.
Seat and seat belts
2-16
OA0X13E4
2