Mitsubishi Heavy Industries FDCW100VNX-A, Техническое руководство

Страница: 159 / 315

Control
‘19 • HM-T-340
Menu 4.7 - holiday setting
To reduce energy consumption during a holiday you can
schedule a reduction in heating and hot water temperature.
Cooling can also be scheduled if the functions are connected.
If a room sensor is installed and activated, the desired room
temperature (°C) is set during the time period. This setting
applies to all climate systems with room sensors.
holiday setting 4.7
activated
start date
stop date
heating
desired room temperature
hot water comfort
cooling
ventilation
0
economy
off
normal
20.0°
off pool
If a room sensor is not activated, the desired offset of the
heating curve is set. One step is usually enough to change the
room temperature by one degree, but in some cases several
steps may be required. This setting applies to all climate
systems without room sensors.
Vacation scheduling starts at 00:00 on the start date and stops
at 23:59 on the stop date.
TIP
Complete holiday setting about a day before your return so
that room temperature and hot water have time to regain
usual levels.
TIP
Set the vacation setting in advance and activate just before
departure in order to maintain the comfort.
CAUTION
If you choose to switch off hot water production during the
vacation “periodic increase" (preventing bacterial growth)
are blocked during this time. "periodic increase" started in
conjunction with the vacation setting being completed.
Functions
"compressor"
is that which produces heating and hot water
for the accommodation. If "compressor" is deselected, a
symbol is displayed in the main menu on the symbol for the
control module. You cannot deselect "compressor" in manual
mode.
"addition"
is what helps the compressor to heat the
accommodation and/or the hot water when it cannot manage
the whole requirement alone.
"heating"
means that you get heat in the accommodation. You
can deselect the function when you do not wish to have heating
running.
"cooling"
means that you get cooling in the accommodation
in hot weather. This alternative requires an accessory for
cooling or that the heat pump has a built in function for cooling
and is activated in the menu. You can deselect the function
when you do not wish to have the cooling running.
Menu 4.4 - time & date
Set time and date, display mode and time zone here.
time & date 4.4
time
day
year
month
24 h
12 h
date
TIP
Time and date are set automatically if the heat pump is
connected to myUpway™ . To obtain the correct time, the
time zone must be set.
Menu 4.6 - language
Choose the language that you want the information to be
displayed in here.
language 4.6
Control
- 157 -