Mitsubishi Heavy Industries FDCW100VNX-A, Техническое руководство

Страница: 149 / 315

Control
‘19 • HM-T-340
Menu 2.9 - advanced
Menu "advanced" has orange text and is intended for the
advanced user. This menu has several sub-menus.
advanced 2.9
periodic increase
hot water recirc.
Menu 2.9.1 - periodic increase
periodic increase 2.9.1
activated
period
start time
Next periodic increase
days
period
Setting range: 1 – 90 days
Default value: 14 days
start time
Setting range: 00:00 – 23:00
Default value: 00:00
To prevent bacterial growth in the water heater, the heat pump
and any additional heater can increase the hot water
temperature for a short time at regular intervals.
The length of time between increases can be selected here. The
time can be set between 1 and 90 days. Factory setting is 14
days. Tick/untick "activated" to start/switch off the function.
Menu 2.3 - scheduling
Two different periods of hot water comfort per day can be
scheduled here.
Scheduling is activated/deactivated by ticking/unticking"
activated". Set times are not aff ected at deactivation.
all
mon
tues
wed
thur
fri
sat
sun
activated
schedule 2 schedule 1
SCHEDULING HOT WATER 2.3
normal
Activated
Schedule
Time period Adjusting
Day Conflict
Schedule:
The schedule to be changed is selected here.
Activated:
Scheduling for the selected period is activated
here. Set times are not aff ected at deactivation.
Day:
Select which day or days of the week the schedule is to
apply to here.
To remove the scheduling for a particular day, the time for that
day must be reset by setting the start time to the same as the
stop time. If the line "all" is used, all days in the period are set
for these times.
Time period:
The start and stop time for the selected day for
scheduling are selected here.
Adjusting:
Set the hot water comfort that is to apply during
scheduling here.
Conflict:
If two settings conflict with each other a red
exclamation mark is displayed.
TIP
If you wish to set similar scheduling for every day of the
week start by filling in “all” and then changing the desired
days.
TIP
Set the stop time earlier than the start time so that the
period extends beyond midnight. Scheduling then stops at
the set stop time the day after.
Scheduling always starts on the date that the start time is
set for.
Control
- 147 -