Mitsubishi Electric QJ71DN91, Руководство пользователя

Страница: 225 / 234

App - 9 App - 9
MELSEC-Q
APPENDIXES
Appendix 6 Parameter Setting Sheet (For the Master Function)
Buffer memory
address (Hex.)
Item Description Set value
01D7
H
Constant scan
Specify a value to make the link scan time constant.
(Setting range: 0 to 65535ms (FFFF
H
))
[
th slave node]
Buffer memory
address (Hex.)
Item Description Set value
01D8
H
+ ( - 1) 8 Node No. and message group
Low byte: Node No. of th slave node (MAC ID)
00
H
to 3F
H
(0 to 63)
High byte: 01
H
Node that supports UCMM and uses any of
message groups 3, 2, and 1.
03
H
Node that supports UCMM and uses message
group 1
04
H
Node that does not support UCMM (Group 2 only
server)
80
H
Reserved node
01D9
H
+ ( - 1) 8 Connection type
Select a connection type for I/O communication.
0001
H
= Polling
0002
H
= Bit strobe
0004
H
= Change of state
0008
H
= Cyclic
01DA
H
+ ( - 1) 8 Number of byte modules
Low byte: Number of input byte modules
High byte: Number of output byte modules (set in hexadecimal)
Eight bit modules (8 points) are counted as one byte module.
01DB
H
+ ( - 1) 8 Number of word modules
Low byte: Number of input word modules
High byte: Number of output word modules (set in hexadecimal)
01DC
H
+ ( - 1) 8
Number of double-word
modules
Low byte: Number of input double-word modules
High byte: Number of output double-word modules (set in
hexadecimal)
01DD
H
+ ( - 1) 8 Expected packet rate
Set an expected packet rate for the slave node.
(Setting range: 0 to 65535ms (FFFF
H
))
0000
H
: 200ms (Default)
Other than 0000
H
: Set value – 1 (ms)
01DE
H
+ ( - 1) 8 Watchdog timeout action
Set an action for watchdog timeout of the slave node.
0000
H
: Equivalent to the following Timeout (Default)
0001
H
: Timeout
0002
H
: Auto Delete
0003
H
: Auto Reset
01DF
H
+ ( - 1) 8 Production inhibit time
Set a production inhibit time.
(Setting range: 0 to 65535ms (FFFF
H
))
0000
H
: 10ms (Default)
Other than 0000
H
: Set value –1 (ms)
When setting parameters, use a copy of this sheet.