18
4.2.2 In hardware self-diagnostic operation mode
(When the MODE LED is lit "orange")
For the hardware self-diagnostic function, refer to the C Controller Module User’s
Manual.
Change the operation mode by the switch. (Refer to Section 4.3)
LED
indicator
Name
LED
status
Description
On
Hardware self-diagnostic mode
MODE MODE
Off
Hardware fault occurred or the module is
being reset
Off
When all LEDs but the MODE LED turn off, it
indicates that the self-diagnostic test has not
been executed yet or is normally completed.
ERR.
Hardware self
-diagnostic
error
Flashing
An error has occurred when the mode (Mode
1, Mode 2, Mode 3, Default setting mode)
selected by SELECT operation was
executed.
The error location can be confirmed by the
ON/OFF status of the following LEDs.
"RUN" "CF CARD" "CH2 SD/RD" "USER"
On
ERR. LED off:
Mode 1 selected
ERR. LED flashing: Indicates the location of
the error that occurred by
execution of Mode 1 to 3.
RUN
Mode 1/
Error location
indication
Flashing Mode 1 in execution
On
ERR. LED off:
Mode 2 selected
ERR. LED flashing: Indicates the location of
the error that occurred by
execution of Mode 1 to 3.
CF CARD
Mode 2/
Error location
indication
Flashing Mode 2 in execution
On
ERR. LED off:
Mode 3 selected
ERR. LED flashing: Indicates the location of
the error that occurred by
execution of Mode 1 to 3.
CH2 SD/RD
Mode 3/
Error location
indication
Flashing Mode 3 in execution
On
ERR. LED off:
Default setting mode
selected
ERR. LED flashing: Error occurred during
execution of Default
setting mode
USER
Default setting
mode/Error
location
indication
Flashing Default setting mode in execution
Содержание Q06CCPU-V-H01
Страница 37: ......
