Mitsubishi Electric Q06CCPU-V-H01, Руководство пользователя

Страница: 2 / 38

A-1
z SAFETY PRECAUTIONS z
(Always read these instructions before using this product.)
Before using this product, please read this manual and the relevant manuals
introduced in this manual carefully and pay full attention to safety to handle the
product correctly.
In this manual, the safety instructions are ranked as "DANGER" and "CAUTION".
Indicates that incorrect handling may cause hazardous
conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous
conditions, resulting in minor or moderate personal injury
or physical damage.
Note that the
CAUTION
level may lead to a serious consequence according
to the circumstances.
Always follow the instructions of both levels because they are important to
personal safety.
Please keep this manual in a safe place for future reference and also pass this
manual on to the end user.
[DESIGN PRECAUTIONS]
DANGER
z Provide a safety circuit outside the C Controller module to ensure that the
entire system will operate safely even if an external power failure or C
Controller module failure occurs.
Failure to do so could result in accidents due to erroneous output or
operation.
(1) For an emergency stop circuit, protection circuit and interlock circuit that
is designed for incompatible actions such as forward/reverse rotation or
for damage prevention such as the upper/lower limit setting in
positioning, any of them must be provided outside the C Controller
module.
(2) When the C Controller module detects the following conditions, it will
disable the output (Y) from the user program and writing to buffer
memory in the case of both (a) and (b) and turn off all outputs for (b).
Whether to hold or clear all the outputs is set by a parameter.
(a) The overcurrent protector or overvoltage protector of the power
supply module is activated.
(b) An error such as a watchdog timer error is detected by the
self-diagnostic function of the C Controller module.
If an error occurs in I/O control parts and the C Controller module cannot
detect the error, all the outputs may turn ON.
Provide a fail-safe circuit or a preventive mechanism outside the C
Controller module so that machines will operate safely in such a case.
For fail-safe circuit examples, refer to Section 3.2 in this manual.
DANGER
CAUTION