Mitsubishi Electric Q06CCPU-V-H01, Руководство пользователя

Страница: 12 / 38

2
(b) Take appropriate measures so that the shield section of the
shielded cable from which the outer cover was partly removed for
exposure is earthed to the control panel on an increased contact
surface.
A clamp may also be used as shown in the following.
In this case, however, apply a cover to the inner surface of the
control panel which comes in contact with the clamp when
painting.
Shield section
Shield cable
Clamp fitting
Masked
Screw
Recommended clamp fitting:
Mitsubishi AD75CK
Note) The method of earthing by soldering a wire onto the shield
section of the shielded cable as shown below is not
recommended. The high frequency impedance will increase
and the shield will be ineffective.
Shield cable
Wire
Solderless terminal
(2) Included parts
The following tables list the parts included with the C Controller module.
Product Name Type Quantity
C Controller Module Q06CCPU-V-H01 1
Battery Q6BAT 1
This Manual ------ 1
(3) Generic terms and abbreviations used in this manual
Unless otherwise specified, this manual uses the following generic terms
and abbreviations to explain the Q06CCPU-V-H01 C Controller module.
Generic term/abbreviation Description
C Controller module
Abbreviation for the Q06CCPU-V-H01 C
Controller module
C Controller system
Generic term for systems where the C
Controller module is mounted